-
ATCA Node Blade - Two Feature-Rich Processor Options:
» PICMG 3.0, PICMG 3.1 option 9 compliant carrier board
-
» Four (4) Mid-Size AMC slots that support AMC.0 rev 2, AMC.2, AMC.3
-
» PCI Express®, SRIO, SAS/SATA or 10GbE direct AMC interconnect
-
» 10GbE redundant Fabric Interface
-
» Gigabit Ethernet switching
-
» Telco Clock for all AMC slots
-
» Full Hot-Swap capabilities
-
» Management via SNMP, TELNET, CLI, either In-band or Out of band via 10/100Base-T Ethernet or RS232
-
詳細
スタンダード
コンプライアンス
This board is compatible to the following standards:
» PICMG 3.0/3.1 option 9
» AMC.0 rev 2, AMC.2, AMC.3 » PCI Express®, SRIO or 10GbE direct AMC interconnect
» IPMI v1.5
ビルディング
ブロック
» Ethernet Switch
» Ethernet Switch Controller + Memory
» Synchronous Clock Distribution
» 4 x AMC sites » RTM sites (Zone 3)
» IPMI
» Power Supply Mezzanine incl. Holdup Circuit
イーサーネット
スイッチ
» Broadcom BCM56502 StrataXGSTM Gigabit Switch
» 24x 1-GbE ports and 2x 10-GbE ports
» 20 ports used for direct connections to each AMC ports 0 and 8 to 11
» 2 ports to the RTM
» 2 ports to the base interface
» 2x 10GbE ports to FI Channel 1 and 2.
イーサーネットスイッチコントローラー
・
システムメモリ
» Socketless AMCC PPC405GPr 400 MHz
» 256 MBytes SDRAM 133 MHz; 128 MB Flash (supports multiple OS images); used for switch provisioning and diagnostic
クロック・PCIエクスプレスクロックディストリビューション
» Multi-service Line Card PLL
» MLVDS Buffer
» FPGA for clock distribution and control
» PCI Express® compliant clock source with optional Spread Spectrum ClockAMCs
インターフェース
» 5 x GbE to AMCs distributed as follow:
» Common region ports 0 from Ethernet switch
» Fat pipe region port 8 to 11 from Ethernet switch» Port 2 & 3 are direct connect to neighbor AMC, B1 to B3 & B2 to B4
» Port 4 to 7 are direct connect to neighbor AMC, B1 to B2 & B3 to B4
» 7x channels from each AMC slot extended connector ports 13-15 and 17 – 20 to the RTM
» AMC port 12 for Automatic Protection Switching (APS) across redundant Carriers (up to 2.5Gbps)IPMI » HPM.1 protocol to ensure field safe update functionality of the IPMI Controller for field upgrades, rollbacks and watchdog functions
» PICMG 3.0 / IPMI 1.5 compliant
AMCインターフェース
IPMI MTBF: > 105 000 hours @ 40°C/104°F (Telcordia SR-332, issue 2); ハードディスクなし
AMCサイト » 4 Slot carrier
» B+ connectors (pressfit)
» AMC.1 type 4E1S2 on B1/B2/B4 and type 4E1S1 on B3 » AMC.2 Type 4E1 on B1, B2, B3, B4
» Telecom clocks and/or PCI Express clock supportRTMサイト » 3 TYCO/ERNI ZD-F-4-10-2-B-22 Connectors. » Support for 7 RTM lanes from each AMC
» 10/100Base-T for management
» 12V and 3V3sus Supply Voltage connections » I2C support» JTAG and production I/O support
サービス
・
アプリケーション
» NTP client for retrieving accurate time and date information » Onboard event management
» Test and trace facilities
» POST (power on self tests) diagnostics» The system shall provide a standards based SNMP implementation supporting SNMP v1, v2 and v3 for monitoring and management of Ethernet
» IPMI version 1.5 for board management
» IPMI based management of the AMC slots
» Persistent storage of configuration across restarts
» Support for retrieving and installing multiple configurations
» Support for hot-plugging of the carrier board as well as AMCs
» Two alternative firmware versions shall be stored allowing for rollback after updatesイーサーネット
・
ブリッジング
» Static link aggregation (IEEE 802.3ad)
» Classic, rapid and multiple spanning tree algorithms shall be supported (IEEE 802.1D, IEEE 802.1w);VLAN tagging (IEEE 802.3ac)
» Quality Of Service on all ports (IEEE 802.1p)
» Full Duplex operation and flow control on all ports (IEEE 802.3x)
» Auto negotiation of speeds and operational mode on all external GE interfaces as well as on the base interfaces » Dynamic L2 multicast registration (GMRP)環境 オペレーティング
温度 0 °C to 55 °C
湿度 15%-90% (non-condensing) 条件:55°C (131°F) 4000 m (13,123 ft)
高度 30G/11 ms half sine
振動 5 to 100Hz: 1G @ 0.25 Octave/minute
ストレージとトランジット
温度 -40 to +70°C / -10 to 158°F*
湿度 15%-90% (non-condensing) at 55°C (131°F) 15,000m (49,212 ft)
高度 18G/6 ms
振動 Random 0.89Grms (5-200Hz)